There is a version of every living room where the PlayStation 5 ends up lying flat on a media unit, taking up space and gathering dust, or worse, jammed into an enclosed cabinet where it runs hot. The console is big enough that where you put it changes how the whole room looks, and a wall mount offers a way to lift it out of the way entirely. This PS5 wall mount kit goes further than a plain bracket, because it adds a cooling fan and a Controller Charging station to the same floating shelf. I installed it behind a wall mounted TV to see whether it turns the messy reality of console placement into a clean, organized setup.
Before the details, the standard note. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission does not change what I test or what I recommend, and the mount here was installed and used exactly the way a gamer would install it.
The rest of this review covers the hardware, the installation, the cooling and charging features, and whether this bracket is the right answer for your room.
Design and Build
The mount is a metal shelf bracket that holds the console in a cradle, with adjustable supports so it can accommodate the original PS5, the Slim, and the Pro. The metal is thick and powder coated, and the cradle has padded contact points that keep the console secure without scratching the shell. The whole unit mounts flat to the wall with the included hardware, and it is designed to sit behind a wall mounted television so the console disappears from view.
The integrated features are what set this apart from a plain bracket. A cooling fan sits at the base of the cradle and blows air across the console, and a charging station on the side holds two controllers with LED indicators. The fan is quiet enough to be forgettable during a session, and the charger is a genuine convenience because controllers end up with a permanent home right where the console lives.
Key Features
The headline feature is the floating mount itself. The console sits off the floor and off the media unit, which frees up surface space and keeps the console away from pets, dust, and feet. The bracket is rated to hold the console securely with a wide base, and the included anchors suit both drywall with studs and solid surfaces when you use the right fixings.
The cooling fan is the practical feature for anyone worried about airflow. When a console is mounted tight against a wall or tucked behind a TV, it loses the open air it normally gets, and the fan compensates by drawing air through the cradle and across the vents. It runs quietly and stays on while the console is active, which keeps temperatures in a reasonable range during long sessions.
The charging station completes the package. Two controller cradles charge at once with protection against overcharging, and the LED indicators show the state at a glance. Because the mount has its own power lead for the fan and charger, the controllers charge even when the console is off, as long as the mount is plugged into a live source.
Real-World Performance
Installation took about an hour and required the usual care of any wall job. The bracket needed to be level and anchored to solid points, and I used a stud finder and the included hardware to get it secure. Once mounted, the console slid into the cradle and locked in place with the padded supports, and the whole assembly felt rock solid with no wobble. The charging station and fan were straightforward to connect through the cable guide on the bracket.
In daily use, the mount transformed the room. The console vanished behind the TV, the floor and media unit cleared up, and the only visible traces were the two controllers on the charging dock. A session that used to require kneeling near the cabinet now starts with grabbing a charged controller from the mount. The fan ran through several multi hour sessions and stayed quiet, and the console never felt hot to the touch at the end of a long game.
The honest limitations are real and worth planning around. The mount must be positioned to clear the TV's own bracket, which takes measurement before you drill. Cable routing is the biggest chore, because the console, fan, charger, and TV all need power and signal, and without careful planning you trade a cluttered shelf for a cluttered wall. The fan helps airflow but is not a substitute for a properly vented room, and the charging station holds only controllers, not headsets or other accessories.
One detail earned respect over the month. The padded cradle held the console securely with no movement, and the mount showed no sag or loosening after repeated use, which speaks to the build quality. Removing the console to reach a rear USB port was a minor chore, but it is a fair trade for the tidy result.
Pros and Cons
Pros:
- Floats the console off the floor and frees up media unit space
- Fits the original PS5, Slim, and Pro in disc and digital versions
- Built-in cooling fan keeps airflow moving behind the TV
- Charging station tops up two controllers with clear LEDs
- Padded cradle holds the console securely without scratching
- Quiet operation during long gaming sessions
Cons:
- Requires careful measurement and solid wall anchoring to install
- Cable routing takes planning to look clean
- Fan helps airflow but is not a substitute for ventilation
- Charging station holds only controllers
How It Compares
A wall mount is one of several ways to house a PS5, and the table below lines up the practical trade-offs against the alternatives.
| Feature | Wall Mount Kit | Vertical Stand | Media Cabinet Shelf |
|---|---|---|---|
| Floor and desk space | Frees the most space | Uses floor space | Uses shelf space |
| Airflow | Fan assisted | Open air | Varies with enclosure |
| Controller charging | Built in | Separate dock | Separate dock |
| Installation | Requires drilling | None | None |
| Visual result | Console hidden behind TV | Console on display | Console on display |
If you want the console visible and easily accessible, a vertical stand is simpler and cheaper. If you want to clear the room entirely and add cooling and charging, the wall mount does more but demands the installation effort. The right choice depends on how your room is laid out and how much drilling you are willing to do.
Who Should Buy It
Buy this wall mount kit if you have a wall mounted television and want the console out of sight behind it, if floor space is tight, or if you want a built-in charging home for two controllers. It is also a strong fit for small apartments and media centers where the console has nowhere obvious to live.
Skip it if you rent and cannot drill into your walls, if your TV bracket leaves no clearance behind the panel, or if you prefer the console on display. For anyone with the right wall and the patience to route cables, this is one of the tidiest console solutions you can buy. You can check the current price of the PS5 wall mount kit on Amazon when you are ready.
How We Test
I installed the mount behind a wall mounted TV over a stud and used the console daily for a month. I verified the bracket held the console securely, checked fan noise and airflow during multi hour sessions, and confirmed both controller bays charged reliably with the console off and on.
I checked temperatures by feel after long sessions and inspected the cable routing for strain on the console ports. For independent advice on console airflow and cooling, the coverage at Tom's Hardware is a useful reference. The wall mount kit listing on Amazon shows the current price and compatibility details.
PS5 Wall Mount Kit: Questions People Ask
Does this wall mount work with all PlayStation 5 models?
Yes, the bracket adjusts to fit the original PS5, the Slim, and the Pro, in both disc and digital versions, with the included adapter pieces.
Does the cooling fan actually help the console?
The fan draws air across the console vents and helps move heat away from the wall, which is especially useful when the PS5 is mounted tight behind a TV.
Will the wall mount damage the console?
No, the cradle holds the console with padded supports and does not cover the ventilation openings, so the PS5 mounts securely without scratching.
How do I route cables behind the TV?
The kit includes cable management clips, and with the mount placed behind the TV, power and HDMI cables run up through the bracket and out of sight.
As an Amazon Associate, I earn from qualifying purchases.
