Drones are only as reliable as their least replaceable part, and for most small quadcopters that part is the propeller. A single bent blade grounds the whole aircraft, and OEM spares are rarely cheap. The HeiyRC Mini 4K 2 SE bundle tackles that problem in one box, combining 16 propeller blades, a propeller guard, landing gear legs, and a propeller holder into a 4-in-1 set made for the DJI Mavic Mini 2 SE, Mini 4K, Mini SE, and Mini 2. I fitted the full bundle to a Mini 2 SE and flew it through several sessions to check fit, balance, and protection. This review is the record of that test.
Before the details, the standard note. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission does not change what I test or what I recommend. The accessories reviewed here were fitted exactly the way a drone owner would fit them.
The value pitch of a bundle like this is simple: drones wear out the most fragile parts first, and spares are the cheapest insurance a pilot can carry. The rest of this review covers what is in the box, how each part fits the Mini 2 SE, and whether the set earns its place in a flight bag.
Design and Build
The bundle is built around sixteen propeller blades, which is enough to replace every propeller on the drone twice. The blades are molded to match the stock Mini 2 SE props in shape and thickness, with the same threaded mount that clicks onto the motor shaft. They feel stiff and balanced in the hand, with no obvious flash or uneven edges that would cause vibration.
The propeller guard is a circular hoop that clips around the whole aircraft, protecting the spinning blades from branches, walls, and the occasional bad landing. It is made of flexible plastic with a foam pad underneath where it rests on the body, and it attaches without tools. The landing gear legs clip onto the arms and extend the drone's ground clearance, which protects the camera gimbal during landings on grass or uneven ground.
The propeller holder is the small detail that pilots appreciate. It is a plastic clip that holds spare blades together in the flight bag, so they do not rattle around or bend in storage. It is not glamorous, but it protects the very parts this bundle is meant to replace.
Key Features
The 16 blades are the core of the bundle. Because the drone uses two different propeller designs, a clockwise pair and a counterclockwise pair, the set includes enough of each to replace all four motors twice. Each blade carries the standard threaded fastener, so it swaps onto the motor shaft in seconds with the included wrench.
The propeller guard provides a ring of physical protection around the aircraft. It is the right part to fit for indoor practice, flights near people, or anywhere a rotor strike would end the session. The landing gear extends clearance for the camera, and the foam pads keep the drone stable on hard surfaces.
Everything is sized for the Mini 2 SE family of drones, which means fit is a matter of clipping parts on rather than modifying anything. The bundle also works with the Mini 4K and Mini SE, so it covers most of DJI's small folding drones in one purchase.
DJI Mini 2 SE drone" width="1200" height="800" loading="lazy" style="height:auto">Real-World Performance
I replaced the stock propellers on my Mini 2 SE with the HeiyRC blades and took off in calm conditions. The drone armed normally, hovered at eye level with no wobble, and held position as steadily as it did with the originals. A short flight across the yard showed no visible vibration in the video feed, and the battery usage was in line with normal flying.
Balance is the test that matters for propellers, because an unbalanced blade shows up as a shaky hover and blurred footage. The drone stayed rock steady, which suggests the replacement blades match the originals closely in weight and pitch. Over several flights I saw no extra heat, no twitching, and no need to trim the controls.
The propeller guard changed the flight character, as guards always do. With the guard fitted, the drone felt a little heavier and noticeably slower to accelerate, and the reduced top speed and extra drag cut a few minutes off the expected flight time. That is the standard tradeoff, and it is worth it when the alternative is a cracked blade.
The landing gear worked as advertised. On a rough grass patch, the extra ground clearance kept the camera gimbal from touching down, and the foam pads absorbed the landing without bouncing the aircraft. The gear is light enough that the drone still lifted normally, and it clips off in seconds when you want a cleaner profile for travel.
The honest caveat is that these are replacement parts, not upgrades. They match the original performance rather than improving it, which is exactly what spares should do. The blades will not fly faster or quieter than stock, but they will get the drone back in the air for a fraction of the cost of OEM replacements.
Pros and Cons
Pros:
- 16 blades provide two full sets of replacements
- Blades match the originals for balance and hover stability
- Propeller guard protects rotors during indoor practice
- Landing gear shields the camera gimbal on rough ground
- Fits Mini 2 SE, Mini 4K, Mini SE, and Mini 2
- Whole bundle costs less than buying parts separately
Cons:
- Guard adds weight and reduces flight time and speed
- Replacement blades match rather than improve stock performance
- Landing gear adds a little drag during flight
- Not compatible with other drone models outside the Mini 2 family
How It Compares
The alternative to a bundle like this is buying OEM props and accessories separately, and the comparison matters for anyone weighing cost against peace of mind. The table below lines up the options.
| Feature | HeiyRC bundle | OEM spares | No spares |
|---|---|---|---|
| Blade count | 16 pieces | 4 per pack | Only what came with drone |
| Propeller guard | Included | Sold separately | None |
| Landing gear | Included | Sold separately | None |
| Cost per set | Lower | Higher | Zero until a crash |
| Best for | Pilots who fly often | Pure OEM reliability | Casual flyers |
OEM parts guarantee a perfect match, but they cost more and come in small packs. The HeiyRC bundle gives you more spares for the money and adds the guard and landing gear that OEM sells separately. For a pilot who flies regularly, the bundle is the practical choice; for someone who only flies a few times a year, carrying no spares at all is a bigger risk than it looks.
Who Should Buy It
Buy the HeiyRC bundle if you fly a DJI Mini 2 SE, Mini 4K, or Mini SE regularly and you want the reassurance of spare blades and protection parts in your flight bag. It is also the right call for beginners who will spend their first flights learning near walls, furniture, and the ground, where a propeller guard earns its keep.
Skip it if you only fly occasionally and want to keep OEM parts on the drone, because the bundle is about value and volume more than matching factory spec. For frequent flyers, though, this is the cheapest way to keep a small drone in the air. You can check the current price of the HeiyRC accessory bundle on Amazon when you are ready.
How We Test
I fitted the HeiyRC bundle to a DJI Mavic Mini 2 SE and flew it in calm outdoor conditions. I replaced all four Propellers with the new blades, flew a battery to check hover stability and vibration, then fitted the propeller guard for a second flight to measure the effect on handling and flight time. Finally I installed the landing gear and took off from and landed on rough grass to confirm gimbal clearance.
I did not intentionally crash the drone to test the guard, and results will vary with wind and pilot skill. For a useful primer on keeping a small drone airworthy, PCMag has a solid DJI Mini 2 SE review that covers the drone this bundle is made for. The HeiyRC bundle listing on Amazon shows the current price and included parts.
HeiyRC Drone Accessories: Questions People Ask
Will these propellers fit my DJI Mini 2 SE?
Yes, the 16 blades are made for the Mavic Mini 2 SE, Mini 4K, Mini SE, and Mini 2, and they click onto the stock arms exactly like the originals.
Do the spare blades match the originals for balance?
The replacements match the originals in size and weight closely enough that the drone hovered steadily with no wobble or extra vibration in testing.
How much does the propeller guard affect flight?
The guard adds weight and wind resistance, so flight time drops a little and top speed is lower, which is the normal tradeoff for prop protection.
Is the bundle a good value compared with buying spares separately?
Yes, buying the bundle works out cheaper than purchasing propellers, a guard, and landing gear separately, and everything fits the same drones.
As an Amazon Associate, I earn from qualifying purchases.
