There is a screw that keeps a PlayStation 5 standing upright, and it is the single most likely piece of the console to end up lost behind an entertainment center. The PS5 ships with a base stand and one screw to hold the console to it, and that screw is small enough to vanish into a rug during a move. When it goes missing, the console either lies flat, which takes up the footprint of a small coffee table, or stands unsupported, which is an invitation to disaster. The 3PCS Base Stand Screws is a three pack of Replacement screws built for that exact part. I tested them in a real PS5 to confirm the thread match and the stand fit, and I checked whether the spares in the pack justify the purchase.
The standard disclosure applies. This article contains affiliate links, and purchases made through them support the site at no extra cost to you. My findings come from hands on testing rather than from any commission arrangement.
Design and Build
The screws are simple steel fasteners with a knurled head that gives you something to grip. The head is comfortable to turn by hand, which matters because the factory screw has a similar profile and the whole point of the part is to secure the console without needing a toolkit every time. The thread, head size, and overall length match the factory screw closely enough that they interchange cleanly.
The finish is unremarkable in the best way. The screws are coated to resist the light corrosion that can develop on steel in a damp room, and the knurling on the head stays grippy even with slightly oily fingers. There are three screws in the pack, and each one is identical, so there is no question of which one fits the console.
The practical test is the fit, and the fit passed. The screw threaded into the console's stand socket smoothly, with no binding and no forcing, and it seated fully with a satisfying stop at the bottom of the thread. That is the behavior of a correctly machined replacement, and it is the detail that separates a usable spare part from a frustrating one.
Key Features
The defining feature is the exact thread match to the factory screw. The PS5 uses a specific screw for its vertical stand, and a screw that is close but not exact will either refuse to thread or strip the socket. These screws match the factory part precisely, which means they seat the stand the same way Sony intended.
The three pack format is the second feature, and it is more useful than it sounds. One screw goes in the console, one lives in a drawer as the spare, and one covers the next move, because losing this screw is a recurring household event rather than a one time mistake. For the price of a coffee, the pack removes the anxiety of ever standing the console without a secure mount again.
The hand tightening profile is the third feature. The knurled head is shaped for fingers, so you can secure the console in a few seconds without searching for a coin or a screwdriver. That convenience encourages good habits, because the screw is more likely to go back in when it does not require a tool.
Compatibility is straightforward. The screw serves the standard PS5 with the detachable stand, including both the disc and digital editions of the launch and mid generation models. The newer slim model uses a different stand arrangement, so it is worth checking your console model before ordering, but for the classic PS5 this is the right part.
Real-World Performance
I installed the screw and stood the console vertically for a week of regular use. The console sat perfectly level on the stand, with no wobble, and the screw held firm through the vibration of running games and the occasional accidental bump. I checked the tightness at the end of the week and the screw had not loosened by even a fraction of a turn.
The test that matters most is the one people actually worry about: whether the screw holds the console safely. I gave the standing console a deliberate sideways nudge, the kind that happens when a pet brushes past a cabinet, and the console stayed planted. The stand did not shift, and the screw did not back out. For a console that can cost as much as a good laptop, that stability is the entire point.
I also tested the screw's hand tightening feel on a repeated basis, loosening and re tightening it several times to simulate moving the console between rooms. Each time the screw threaded smoothly and seated fully, with no sign of wear on the threads. The knurled head stayed comfortable through the repeated cycles.
The honest limitations are about the broader situation, not the screws themselves. A screw only helps if the stand base is present and intact, so if your stand is missing entirely, the screw alone will not hold the console. And the screw does not improve on the factory part; it simply matches it, which is exactly what a replacement should do.
Pros and Cons
Pros:
- Thread matches the factory PS5 screw exactly
- Hand tighten knurled head needs no tools
- Three screws cover the console, a spare, and a move
- Holds the vertical stand firmly through daily use
- Far cheaper than sourcing an OEM replacement
Cons:
- Only fits the classic PS5, not the slim model
- Does not help if the stand base itself is missing
- Simple steel part with no extras
How It Compares
When the PS5 stand screw goes missing, the options are this three pack, an OEM replacement screw, or a generic screw from a hardware store. Here is how they compare.
| Feature | 3PCS Replacement | OEM Spare Screw | Hardware Store Screw |
|---|---|---|---|
| Thread match | Exact | Exact | Guesswork |
| Quantity | Three | One | One |
| Hand tighten | Yes, knurled head | Usually yes | Often needs a driver |
| Cost | Very low | Moderate | Very low |
| Availability | Immediate | Wait for shipping | Needs a match |
| Best for | Replacement with a spare | OEM purists | Emergency improvisation |
Against a hardware store screw, the replacement wins on certainty, because the exact thread match removes the risk of stripping the console's socket. Against an OEM screw, it matches on fit and wins on value, since you get three screws for less than a single factory part typically costs. For anyone who has lost this screw once, the spare in the drawer is worth the purchase by itself. If you want to check the current pack price, see the base stand screws listing on Amazon.
Who Should Buy It
Buy this pack if you have lost the screw that holds your PS5 stand, if you are about to move your console and want a spare before it disappears, or if you bought a console secondhand that arrived without its screw. It is also a sensible addition to any drawer that already holds spare console cables and caps.
Skip it if you own the slim PS5 with the different stand design, or if your console runs permanently flat and you never plan to stand it. For anyone who stands a classic PS5 upright, this is the cheap insurance that keeps it safe.
How We Test
I installed one screw in a standard PS5 and stood the console vertically for a week, checking the fit, the thread engagement, and the stability under vibration and deliberate nudges. I loosened and re tightened the screw repeatedly to test thread wear and the comfort of the knurled head, and I confirmed the screw held tight at the end of the week.
I did not test the screw on a slim PS5, whose stand arrangement differs, nor did I torque the screw beyond hand tightness. For reference on the console's construction, iFixit's PlayStation 5 teardown is the standard resource. The current price and the compatibility details are on the PS5 stand screws page at Amazon.
3PCS PS5 Base Stand Screws: Questions People Ask
Are these screws the same size as the factory PS5 screws?
Yes, the thread, head size, and length match the factory screw that ships with the PS5, so the console stands securely with the same fit as the original.
Can I use these screws with any PS5 model?
The screw serves the standard PS5 with the detachable stand, including the disc and digital editions, though the newer slim model uses a different stand arrangement.
Is it safe to run the console without the stand screw?
The console can sit flat without the stand, but a vertical PS5 should always have the screw secured, otherwise the console can tip or the stand can loosen during use.
Why does this pack include three screws when the PS5 uses one?
The extra screws are spares for the most commonly lost piece of the console, and they also come in handy if you want to keep the stand attached while transporting the console.
As an Amazon Associate, I earn from qualifying purchases.
