Every FPV pilot knows the walk of shame with a quad under one arm and a radio under the other. The props dig into your ribs, the battery bag swings, and by the time you reach the field you are juggling gear that should be hanging off your back. Dedicated drone backpacks exist, but they cost real money and often hold gear you do not need. The two-set FPV drone lock mount takes the opposite route: a pair of plug-in buckles and battery straps that turn any backpack into a quad carrier. I hauled a five-inch FPV rig to a field every week for a month to find out whether a ten-dollar bundle can replace a dedicated pack.
Before the field notes, the standard disclosure. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission never changes what I test or what I recommend.
Design and Build
The bundle is refreshingly simple. Each set contains a plug-in buckle and a pair of battery straps, and the whole thing weighs almost nothing in the hand. The buckle is a rigid plastic channel that slides over a backpack strap, with a latch that closes to lock it in place. The battery straps are the reinforced nylon kind, wide enough to spread pressure across a quad frame rather than digging into Carbon Fiber.
Build quality is honest for the price. The plastic is sturdy rather than premium, with no sharp mold lines that would chew through a strap, and the latch mechanism snaps shut with a positive click. The straps use the standard hook-and-loop style found across the FPV hobby, so they hold tight under load and release cleanly when you want them off. Nothing here feels like it will fail in the first season, which is the bar a field accessory has to clear.
Key Features
The plug-in buckle is the core of the system. It clips over the strap of any backpack, backpack-style radio bag, or gear harness, and the latch holds it there with no drilling, sewing, or modification. That means the mount works on the pack you already own, which is the whole point of the product. You can move it between bags in seconds, and because the bundle ships with two sets, you can keep one on each pack you use.
The battery straps are where the load actually lands. Each strap is long enough to wrap around a five-inch quad frame with a battery installed, and the hook-and-loop closure lets you cinch the drone tight against the backpack so it does not swing when you walk. The DIY angle matters here too: because the mount is a bare buckle and straps, you decide exactly how the quad hangs, which battery orientation you use, and how the antenna sits. If you want to compare the current price against other drone carry solutions, the Amazon listing for the two-set FPV drone lock mount is a useful reference.
Real-World Performance
I ran the mount on a 25-liter hiking pack with a five-inch FPV quad, a radio, and a battery bag, on the weekly walk to a grass field about a kilometer away. The quad sat against the pack strap with the frame cradled by the straps, and it stayed put through the whole walk. There was no swinging, no rubbing on the ground, and no pressure point digging into my shoulder, which is more than I can say for carrying the same rig under an arm.
The straps earned their keep under load. Cinched tight, the quad sat rock solid against the pack, and I deliberately jogged the last stretch on one trip to see if anything shifted; it did not. The buckle stayed latched through gate entries, tree branches, and the kind of shove a pack gets when you duck under a fence. When I wanted the quad off, the straps released in two pulls, and the drone came away without fighting the hardware.
The honest limits showed up in fit and finish. The buckle needs a backpack strap of reasonable width and thickness; a heavily padded suspension strap on a big hiking pack is a tight squeeze, and a very thin laptop-bag strap leaves the mount feeling loose until you cinch the straps. The plastic also has a utilitarian look, so if you want a machined metal mount with anodized edges, this is not it. For the price of a bundle that does the job, those are fair tradeoffs, not deal breakers.
Pros and Cons
Pros:
- Two complete sets for two backpacks or two quads
- Plug-in buckle needs no drilling or modification
- Long battery straps hold a five-inch quad firmly
- Lightweight enough to ignore once fitted
- Works with the backpack you already own
Cons:
- Buckle fit depends on your backpack strap width
- Basic plastic finish will not win beauty contests
- No padding, so sharp frames press against the strap
How It Compares
Quad-carrying solutions split between dedicated drone backpacks, soft quad bags, and strap-on mounts like this one. I compared the lock mount against a basic drone backpack and a hardshell case to see where each one earns its space in a field kit.
| Feature | FPV Lock Mount | Dedicated Drone Backpack | Hardshell Quad Case |
|---|---|---|---|
| Price | Low, two sets per bundle | High | Medium to high |
| Setup | Clip on any backpack | Purpose built | Build or modify interior |
| Protection | None, quad hangs open | Padded compartments | Full shell protection |
| Field access | Release and fly in seconds | Unzip and lift out | Open latches and lift |
| Weight | Negligible | Adds pack weight | Heavy |
| Hands-free carry | Yes, on any pack | Yes | Carry handle |
Against a dedicated backpack, the mount wins on price, weight, and flexibility. A drone backpack protects the quad properly and carries batteries in dedicated pockets, but it costs ten times more and sits idle when you use a normal pack. The hardshell case wins outright on protection for travel, but it is heavy and awkward for a short walk to a local field. For the everyday pilot who flies close to home, the lock mount is the pragmatic choice, and it is the one that stayed on my pack after the month ended.
Who Should Buy It
Buy this mount if you walk or ride to a local field with an FPV quad, if you already own a decent backpack and do not want a second one, or if you fly multiple quads and want a cheap carry option for each. It is also a sensible first accessory for a new pilot who is spending money on goggles and batteries and wants to skip the premium bag.
Skip it if you regularly transport quads in a car for hours, if you fly expensive rigs that deserve padded protection, or if your backpack has straps that are too thick for the buckle. For everyone else, this is the cheapest real upgrade to your field routine. You can check the current price for the two-set FPV drone lock mount on Amazon when you are ready to fly hands-free.
How We Test
I used the mount weekly for a month, carrying a five-inch FPV quad on a 25-liter hiking pack across walks, bike rides to the field, and a deliberately rough trail to test the latch and straps. I checked buckle security under load, strap hold under a light jog, and how easily the quad released when it was time to fly.
I also tested the fit against two different packs with different strap widths, and I was honest about the straps that were too narrow or too thick. The test reflects hobbyist field use, not commercial delivery or long-haul travel. For a deeper look at carrying quads in the field, Tom's Hardware FPV drone coverage is a helpful reference. The FPV drone lock mount listing on Amazon shows the current price and shipping details.
FPV Drone Lock Mount: Questions People Ask
Will the drone mount fit any backpack?
The buckle slides over standard backpack straps and webbing, but measure your strap width first, because very thick padded straps can be a tight fit and thin laptop-bag straps can feel loose until cinched.
Does the mount hold a heavy FPV quadcopter safely?
The battery straps are strong enough for a typical five inch FPV quad, and the quad hangs securely under your pack for short walks to the field, provided you cinch the straps tight.
How do you attach a quad to the mount?
Slip the buckle over the backpack strap, lay the quad against the strap, and run the battery straps around the frame so the drone hangs with the battery cradled and the props clear of your back.
Can the mount be used on a motorcycle or bike?
The design targets backpack straps and webbing. Bike or motorcycle attachment would need a compatible strap setup, so check your rig before relying on it at speed.
As an Amazon Associate, I earn from qualifying purchases.
