The PlayStation VR 2 is a fantastic headset with one persistent problem: it squeezes. The stock cushion presses into the forehead, the weight sits heavy on the nose and cheeks, and the lenses have a habit of drifting out of the sharp center of the view, the sweet spot, every time you lean or look around. Sony made the games great, but comfort is where the headset still needs help. The Globular Cluster CMP2 is a comfort mod kit built specifically to fix that, and it addresses the squeeze and the drift with a soft forehead pad, a bigger rear pad, and a rear weight balancer.
I installed the CMP2 on my own PS VR 2 and played through a month of long sessions, including a run of a lengthy action game that used to leave pressure marks on my forehead. The difference was immediate and permanent. The headset now rests on the top of my head instead of my face, the lenses hold their sweet spot through hours of play, and the whole unit feels lighter because the weight sits in a better place. This is the single most effective accessory I have added to the headset.
The standard disclosure first. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission does not change what I test or what I recommend, and the mod was installed exactly as the kit directs.
The rest of this review covers the parts, the installation, the comfort improvement, and whether the CMP2 is worth the money for your VR time.
Design and Build
The CMP2 is a collection of well made replacement parts rather than a full new strap. The kit includes a soft forehead pad, a larger and softer anti slip rear pad, a counterweight that sits behind the head, and the mounting pieces that hold everything in place. Each cushioned part is covered in a smooth, breathable material that is noticeably softer than the stock Sony foam, and the construction feels durable enough for years of daily use.
Every part that touches your head is interchangeable and held in place with magnetic mounts, which is a detail I appreciated the moment I used it. The magnets are strong enough that the pads stay firmly in position during vigorous play, yet the whole cushion assembly pops off for cleaning in seconds. Anyone who has spent time with the stock PS VR 2 foam, which collects sweat and smudges, will understand why that matters.
The counterweight is the engineering center of the kit. It clips onto the rear cradle and adds mass behind the head, which changes the entire balance of the headset. Where the stock unit pitches forward onto your face, the CMP2 shifts the center of gravity so the weight sits over the crown of your head, and that single change is what makes hours of play possible. The parts are matte, low profile, and do not look out of place on the headset.
Key Features
The Sweet Spot Keeper is the feature most PS VR 2 owners will feel first. It is the soft forehead pad, and its job is to press gently against your forehead and hold the headset in the exact optical position where the lenses are sharpest. Without it, the headset drifts as you move, the image blurs, and you waste play time re adjusting. With it, the lenses stay locked on the sweet spot through fast action and long sessions, which is a genuine improvement to the core experience.
The weight balancer is the second headline feature. By adding mass to the rear of the headset, it counterbalances the heavy front optics and pulls the pressure off your nose and cheeks. The result is a headset that feels balanced rather than front heavy, and the forehead pad carries the load instead of your face. It is the kind of fix that sounds minor on paper and transforms the experience in practice.
The bigger, softer anti slip rear pad does the quieter work. The stock rear cushion is small and lets the headset slide on the back of the head, which contributes to the front pitch. The CMP2 pad is larger and has a grippy surface that holds the headset in place on the occipital bone, so the whole assembly stays put instead of creeping forward during a racing game or a boxing workout. The three parts work together as one system, and that is the point.
Real-World Performance
The difference was apparent in the first session. I installed the CMP2, put on the headset, and immediately noticed that the weight sat on top of my head rather than pressing into my cheeks. The forehead pad was soft against my skin, the rear pad gripped without digging in, and the headset no longer felt like a heavy visor hanging off my face. I could see the edges of the view clearly from the first minute, which is not something I could always say with the stock setup.
After an hour of play the contrast with the stock experience was stark. Where the stock cushion used to leave pressure marks and push me to take the headset off, the CMP2 let me keep going. I played through a three hour session of an action game and stopped only because the game session ended, not because the headset hurt. My forehead felt fine, my cheeks were not compressed, and the lenses had not drifted out of the sweet spot once.
Fast movement is where the mod shows its worth. In a rhythm boxing game and a racing title, I snapped my head around constantly, and the headset stayed planted. The rear pad held firm, the sweet spot keeper kept the image sharp, and I never reached up to shove the headset back into place. The stock unit would have needed constant nudges by now, and the CMP2 simply did not.
I also tested the swap feature during the month. After a particularly sweaty session, I popped the pads off with the magnets, rinsed them, and had them back on the headset before the next game. The cleaning cycle took seconds, and the magnetic mounts clicked back into position with no looseness. For a piece of gear that sits against your face for hours, that maintenance ease is a real feature, not a gimmick.
Pros and Cons
Pros:
- Completely removes the face squeeze for most users
- Sweet Spot Keeper holds the lenses sharp through play
- Weight balancer shifts pressure to the top of the head
- Magnetic pads are easy to remove and clean
- Fast, tool free installation in minutes
- Works with the stock PS VR 2 earphones
Cons:
- Adds a small amount of weight to the headset
- Forehead contact may bother some users
- Extra parts to keep track of when swapping
- Does nothing for a headset already comfortable for you
How It Compares
The CMP2 is not the only comfort mod for PS VR 2, and it is worth lining up against the alternatives, including a full replacement strap and the stock setup.
| Feature | Globular CMP2 | Stock PS VR 2 | Full Replacement Strap |
|---|---|---|---|
| Installation | Pads on in minutes | None needed | More involved swap |
| Sweet spot holding | Yes, via forehead pad | Drifts during play | Varies by design |
| Weight balancing | Rear counterweight | None, front heavy | Integrated often |
| Pads and cleaning | Magnetic, washable | Glued on foam | Strap dependent |
| Cost | Moderate | None | Higher |
| Best for | Comfort without rebuilding | Short sessions | Total rework |
The stock headset is fine for short sessions but punishes long ones, and it drifts off the sweet spot in fast games. A full replacement strap can be excellent, but it costs more, takes longer to install, and replaces more of the headset than many people want to change. The CMP2 sits in The Practical middle, fixing the two biggest problems, squeeze and drift, without a full teardown, at a lower price and in minutes.
Who Should Buy It
Buy the CMP2 if you find the stock PS VR 2 uncomfortable after thirty minutes, if the lenses blur when you move, or if you play fast, long, or active VR games. Anyone who wears glasses, who feels the pressure on their cheeks, or who simply wants to play without constantly re adjusting the headset will feel the benefit immediately. It is also the right buy for households where multiple people share the headset, because the magnetic pads make cleaning between users effortless.
Skip it if the stock headset already fits you well and your sessions are short, because you simply will not feel the difference. For everyone else this is the cheapest way to make the PS VR 2 dramatically more comfortable, and you can check the current price of the CMP2 comfort mod on Amazon to see where it lands.
How We Test
I installed the CMP2 on my own PS VR 2 and played across a month of sessions, including a three hour action game, a rhythm boxing title, and a racing game, all chosen for their fast head movement and long session length. I compared the fit against the stock pads, tested the magnetic swap and cleaning cycle, and checked that the kit cleared the stock earphones throughout.
Comfort is subjective, and my head shape is one data point, so I have noted where the mod might not suit everyone. For a deeper look at PS VR 2 comfort and hardware, Road to VR has extensive coverage of the PS VR 2 and its accessories that is worth reading. The Amazon listing for the Globular Cluster CMP2 shows the kit contents and the current price.
Globular Cluster CMP2: Questions People Ask
What does the Sweet Spot Keeper on the CMP2 do?
The soft forehead pad presses gently forward and holds the headset in the clearest optical position, so the lenses stay sharp instead of slipping.
How does the weight balancer help with comfort?
The rear counterweight shifts the headset balance toward the back of the skull, which takes pressure off the nose and cheeks and evens the weight.
Is the CMP2 easy to install?
Yes, the pads replace the stock cushions in minutes without tools, and the cushioned parts attach with magnetic mounts that are easy to swap.
Does the CMP2 work with the PS VR 2 earphones?
Yes, the design clears the stock earphones and their position adjustment, so the audio setup stays exactly as Sony intended.
As an Amazon Associate, I earn from qualifying purchases.
