There are two kinds of TV wall mounts: the flat ones that pin a screen against the wall like a painting, and the full motion ones that let you pull the television out, angle it toward the sofa, and push it back flush when the show is over. The Pipishell full motion mount belongs firmly to the second camp, and it brings a feature list that reads like a checklist for anyone who has ever mounted a TV: articulating arms, tilt, swivel, post-install leveling, and a rating for 26 to 65 inch sets up to 77 lbs. I installed one in my living room, hung a 55 inch television on it, and lived with the setup for a month.
Before the details, the standard disclosure. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission never changes what I test or recommend.
Design and Build
The mount arrives in three main pieces: the wall plate that bolts to the studs, two articulating arms, and the television brackets that attach to the back of the screen. The steel is heavy and reassuringly thick, and the whole assembly has none of the rattle that cheap brackets develop after a month. Everything you need for installation comes in the box, including a full set of screws, spacers, washers, and a level, plus an Allen key and a socket adapter that fit the hardware supplied.
The wall plate is drilled for a range of stud spacings, so you can align it with whatever studs are actually behind your drywall rather than hunting for a hypothetical perfect pattern. The mounting brackets use a standard locking hook design that lets one person hang the TV onto the wall plate and lock it down with two screws, which is the feature that turns a two-person job into a solo one. The finish is a matte black that disappears behind a television, and the caps cover the screw heads so the bracket looks clean even with the TV pulled forward.
Key Features
The defining feature is the articulating arm movement. The bracket extends roughly 20 inches from the wall, enough to clear most entertainment centers and angle the screen toward a sofa on the opposite side of the room. The arms move through three joints: a swivel at the wall plate, a pivot at the arm midpoint, and a swivel at the TV bracket, which gives the screen a wide arc of adjustment rather than a single hinge.
Tilt and swivel round out the package. The screen tilts a few degrees up or down, useful for mounting above eye level or in a bedroom, and it swivels side to side so the picture follows the seating rather than forcing everyone to watch from one spot. The leveling adjustment is the quiet hero: if the TV hangs a quarter inch low on one side, a screw on the bracket turns it level without loosening the wall bolts or lifting the screen again. If you want to compare current pricing, the Pipishell full motion mount listing on Amazon is a useful reference.
Real-World Performance
Installation took about an hour, and most of that was measuring studs and double checking the level. The mount accepts VESA patterns up to 400x400 mm, which covered the back of my 55 inch panel easily, and the hardware kit included the right bolt length for the TV with no trips to a hardware store. Hanging the screen alone was genuinely easy: the hooks engaged with a click, and two screws locked it down in under a minute.
Daily use is where a full motion mount proves itself. I pull the TV forward for gaming sessions at a desk across the room, swing it flush to the wall for cleaning, and angle it toward the kitchen when cooking with a recipe on screen. The arms hold their position without sagging, which is the thing cheap mounts fail at, and the swivel stays put rather than drifting back toward the wall. After a month of constant repositioning, the pivot joints show no looseness or squeak.
The honest limits come from the TV size. The mount is rated to 77 lbs, and while my 55 inch set sat comfortably in that envelope, an oversized 65 inch panel near the weight limit will feel less nimble when swinging it side to side. The extension also pushes the TV about 20 inches off the wall, so a child or a clumsy reach in front of the screen can knock it, which is normal for any full motion bracket. And like every wall mount, the installation is only as strong as the studs it bolts into, so the rating assumes a proper two-stud mount.
Pros and Cons
Pros:
- Roughly 20 inches of reach for flexible viewing angles
- Built-in leveling adjusts without loosening wall bolts
- Full hardware kit with screws, spacers, and a level included
- Reinforced steel holds screens up to 77 lbs securely
- Single-person hang design with locking hooks
- Fits VESA patterns up to 400x400 mm
Cons:
- Full extension pushes the screen about 20 inches off the wall
- Oversized panels near the weight limit feel less nimble
- Requires solid wood studs for the rated load
How It Compares
TV mounts split into flat, tilt, and full motion designs, and the price climbs with the range of movement. I compared the Pipishell against a basic flat mount and a budget tilt mount to see where the extra money goes.
| Feature | Pipishell Full Motion | Flat Wall Mount | Budget Tilt Mount |
|---|---|---|---|
| Movement | Full motion with 20 inch reach | Fixed flush | Tilt only |
| Swivel | Yes | No | No |
| Leveling | Built-in adjustment | Shims needed | Sometimes |
| Max weight | 77 lbs | Varies, often lower | Up to 110 lbs |
| VESA range | Up to 400x400 mm | Varies | Up to 600x400 mm |
| Typical price | Mid | Low | Low |
Against a flat mount, the Pipishell wins on flexibility, because you can point the screen at the sofa, the kitchen, or the desk without moving the furniture. Against a budget tilt mount, it adds swivel, leveling, and a longer reach, which matters in rooms where the TV is not directly opposite the seating. The flat mount wins only on price and Profile. For living rooms with off-center seating, the full motion bracket is worth the difference.
Who Should Buy It
Buy the Pipishell full motion mount if your TV faces the sofa from an angle, if you watch from more than one place in the room, or if you want a mount you can level after hanging the screen. It is a natural fit for living rooms with dining areas, gaming setups that pull the screen toward a desk, and bedrooms where you want the TV angled for reclined viewing.
Skip it if you have a small room where the TV sits directly opposite the seating, where a flat mount is cheaper and cleaner, or if your wall has no wooden studs to anchor into. For everyone else, this is one of the best value mounts in its class. You can check the current price for the Pipishell mount on Amazon when you are ready to hang your television.
How We Test
I installed the Pipishell mount on a two-stud wall with a 55 inch television weighing about 40 lbs, well inside the rated limit. I tested the full range of motion daily, checking whether the arms sagged, the swivel drifted, or the pivots loosened across a month of repositioning. I also unlatched and relatched the TV several times to confirm the locking hooks held securely, and I verified the leveling adjustment could correct a deliberately induced tilt.
I did not test the mount at the full 77 lb limit or on concrete or plaster walls, both of which need different anchors and more care. Independent guidance such as Wirecutter's guide to the best TV wall mounts is a good cross-check for what to expect from full motion brackets. The Pipishell full motion mount product page on Amazon shows the current price and included hardware list.
Pipishell TV Wall Mount: Questions People Ask
Will the Pipishell mount fit my 55 inch TV?
Yes. The mount fits TVs from 26 to 65 inches with VESA patterns up to 400x400 mm, which covers nearly all 55 inch panels currently on the market.
How far does the full motion mount extend from the wall?
The articulating arms extend roughly 20 inches from the wall, so you can pull the TV forward, angle it toward a sofa, or swing it flush when you are not watching.
Can the mount be leveled after installation?
Yes. The mount has a built-in leveling adjustment, so you can fix a slightly tilted TV by turning a screw without loosening the wall bolts.
How much weight can the Pipishell bracket hold?
The reinforced steel structure is rated for up to 77 lbs, which covers the vast majority of 65 inch and smaller televisions, assuming proper installation into wall studs.
As an Amazon Associate, I earn from qualifying purchases.
