The biggest problem with a typical smart plug is that it is a single device. You get one smart outlet, it blocks the second outlet on the wall, and if you want to control two lamps you need two plugs and two wall sockets. The GHome Dual Smart Plug solves that by putting two independently controlled outlets in a single compact fixture. It is a 2-in-1 Wi-Fi smart plug rated for 15 amps, works with Alexa and Google Home, includes app based remote control and timers, needs no hub, and connects over 2.4GHz Wi-Fi. I installed both plugs in the two pack around my home and tested them for two weeks.
Before the details, the standard note. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission never changes what I test or what I recommend.
Design and Build
The dual plug is built around a single outlet that extends into the room with two sockets stacked vertically. The compact body means it does not block the wall outlet above or below, so you keep your existing wall sockets while gaining two smart outlets. The white plastic housing is clean and modest, and the whole fixture feels solid in hand.
Each of the two sockets has its own switch and its own status LED, so you can see at a glance which outlet is active. The sockets are rated for 15 amps, which is a genuinely useful rating that handles lamps, fans, space heaters, and most household appliances without worrying about the limit. The FCC listed certification confirms the plug has passed testing for electrical compliance.
Setup requires only a 2.4GHz Wi-Fi network and the companion app. There is no hub to buy and no bridge to wire in, which keeps the barrier to entry low. The app guides you through pairing each socket, and the whole two pack was online in about ten minutes.
Key Features
Independent outlet control is the defining feature. The two sockets on each plug are separate devices in the app, so you can turn one on and leave the other off, set different schedules for each, and name them separately. A lamp and a fan plugged into the same fixture can follow entirely different routines.
Voice control works through both Alexa and Google Home. Each socket appears as its own device in your assistant, so you can say turn on the living room lamp and turn off the bedroom fan from the same fixture. The voice responses were quick and reliable throughout testing.
Timers and scheduling round out the automation. The app lets you set countdown timers, daily schedules, and group controls, and the schedules run on the plug itself even when the app is closed. That made it easy to automate a lamp turning on at dusk without relying on the phone staying connected.
The no hub design is worth emphasizing. The plug talks directly to your Wi-Fi router, so there is no extra hardware to buy, no proprietary bridge to place, and nothing else to keep powered. For anyone new to smart home gear, that simplicity removes the biggest source of setup friction.
Real-World Performance
I used the two plugs across several rooms. One plug controlled a floor lamp and a ceiling fan in the living room, and the other ran a bedside lamp and a phone charger in the bedroom. Setting up each socket took a couple of minutes, and both plugs connected to the 2.4GHz network without a retry.
Independent control worked exactly as intended. I could turn the lamp on while the fan stayed off, and scheduling a different bedtime for each device was simple. The two sockets never interfered with each other, and toggling one had no effect on the state of the other.
Voice control was the feature I reached for most. Asking Alexa to turn on the bedside lamp produced an immediate response, and Google Home handled the same commands without issue. The plugs also responded instantly through the app, and the physical behavior was consistent across all control methods.
Timers performed reliably. I set a schedule that turned the living room lamp on at the same time every evening and off a few hours later, and it ran correctly for the entire two week test. The only caveat is that both sockets share the plug's Wi-Fi connection, so a home network problem affects both at once, which is a fair trade for the compact form factor.
Pros and Cons
Pros:
- Two independently controlled outlets in one compact plug
- Does not block the wall outlet above or below
- Works with Alexa and Google Home voice control
- App timers and schedules run on the plug itself
- No hub required, simple 2.4GHz Wi-Fi setup
- Rated for 15 amps with FCC listing
Cons:
- Both sockets share a single Wi-Fi connection
- Requires a 2.4GHz network, not 5GHz
- Plug extends noticeably from the wall outlet
- Physical button control is limited compared to app control
How It Compares
Smart plugs come in three common shapes: single smart plugs, dual plugs like this one, and hub based systems. I compared the GHome dual plug against a single plug and a hub based option to show where the dual form factor earns its place.
| Feature | GHome Dual Plug | Single Smart Plug | Hub Based System Plug |
|---|---|---|---|
| Outlets controlled | 2 per plug | 1 per plug | 1 per plug |
| Hub required | No | No | Yes |
| Wall outlet blocked | No, adds two sockets | Often blocks the second | Often blocks the second |
| Alexa and Google support | Yes | Usually | With bridge |
| Max load per socket | 15A | 10A to 15A | Usually 10A |
| Setup difficulty | Low | Low | Higher |
A single smart plug is fine for one device, but it often blocks the second wall outlet and leaves you buying more plugs and sockets as your setup grows. A hub based system can scale to many devices reliably, but it requires buying a hub and adds setup complexity. The GHome dual plug splits the difference by giving you two smart sockets in the space of one, without a hub and with a 15 amp rating that a 10 amp hub plug cannot match.
Who Should Buy It
Buy the GHome dual smart plug two pack if you want to control two devices from one outlet, if you are short on wall sockets, or if you want voice control without a hub. It is an easy fit for bedside tables, living room lamp and fan combos, and office desks where two appliances share a single spot.
Skip it if you only need a single smart outlet, if you have no 2.4GHz network available, or if you want all your smart devices on a single hub protocol. For most households, the dual plug doubles your smart outlet count without doubling your wall socket usage. You can check the current price for the GHome dual smart plug 2 pack on Amazon when you are ready to decide.
How We Test
I tested the GHome dual smart plug two pack over two weeks in a real home. I paired both plugs through the companion app, set up separate schedules for each socket, and controlled the fixtures through Alexa and Google Home to verify voice response. I ran a 15 amp rated space heater through one socket for several days to confirm the rating under load.
I confirmed that the two sockets operate independently by toggling each one separately and checking the app states, and I monitored Wi-Fi stability over the full test period without rebooting the plugs. I did not test the plugs with appliances above the 15 amp rating or outdoors. For independent perspective on smart plug safety and automation, guides such as PCMag's best smart plugs are a useful cross reference.
The GHome dual smart plug 2 pack listing on Amazon shows the current price and package contents.
GHome Dual Smart Plug: Questions People Ask
Can I control the two outlets on the dual plug separately?
Yes. Each socket has its own switch in the app, its own status light, and its own voice identity, so you can turn one device on while the other stays off and set different schedules for each.
Does the GHome dual plug work with Alexa and Google Home?
Yes. After pairing in the app, each socket appears as a separate device in both Alexa and Google Home, allowing voice control of either outlet independently.
Do I need a hub to use this smart plug?
No. The plug connects directly to your 2.4GHz Wi-Fi network through the companion app, with no hub or bridge required for setup or daily use.
What is the power rating of the dual smart plug?
The plug is rated for 15 amps across its sockets, which comfortably handles lamps, fans, space heaters, and most household appliances within the listed limit.
As an Amazon Associate, I earn from qualifying purchases.
