Wireless charging has spent years promising more than it delivered. Most pads topped out at a slow trickle, and the ones that charged fast ran hot or demanded you position the phone perfectly. The Anker MagGo MagSafe charger pad takes a different route by adopting Qi2, the new standard that brings 15W charging and magnetic alignment to a wide range of phones. I tested the white MagGo pad with an iPhone 16 Pro, a 15 Pro, and a Qi2-capable Android device to see whether the standard finally lives up to the promise.
Before the details, the standard note. This article contains affiliate links, and if you buy through one of them the site earns a small commission at no extra cost to you. That commission does not change what I test or what I recommend, and the charger reviewed here was used exactly the way an owner would use it.
The MagGo pad is a simple disc of a charger, but the details matter, so the rest of this review covers the Qi2 standard, the 15W speed, the magnetic alignment, and the heat behavior that makes or breaks a wireless charger.
Design and Build
The charger is a slim white disc with a soft-touch finish and a ring of magnets hidden beneath the surface. It sits flat on a desk or nightstand, with a short integrated cable that exits the rear edge and a small rubber base that keeps the pad from sliding on smooth surfaces. The construction feels premium, with no creaking panels and a clean, minimal look that suits a bedside table.
Anker chose a fixed cable rather than a detachable USB-C cord, which keeps the pad thin and tidy. The magnet ring is positioned to snap onto the alignment ring on the back of compatible iPhones, and the magnetic pull is strong enough that the phone clicks into place with a satisfying grab and stays put even if you nudge it.
Key Features
The feature that matters is Qi2 certification. Qi2 is the successor to the old Qi standard, and it brings the magnetic alignment and 15W charging that used to be exclusive to Apple MagSafe to a broader ecosystem. The MagGo pad is Qi2 certified, which means it delivers the full 15W to any Qi2 phone rather than the slower rates that generic pads offer.
For iPhone owners the compatibility list is simple: the pad works with the iPhone 16 series, the 15 series, and the 14, 13, and 12 series, with the older iPhones charging at the rates their hardware supports. The magnetic snap makes drop-in alignment effortless, so there is no hunting for the sweet spot, and the pad stays cool enough that you can charge overnight without the battery sitting in a heat soak.
The pad ships without a power adapter, which Anker does to keep the price and packaging down. You supply a USB-C adapter of at least 20W to reach the full 15W charging rate, and the pad will work with a slower adapter at reduced speed. It is a small caveat, but worth knowing before the box arrives.
Real-World Performance
Charging speed is where the pad earns its place. With a 20W adapter, the iPhone 16 Pro went from empty to roughly half in about an hour, which matches the full 15W rate rather than the slow trickle of old pads. A morning top-up from 40 percent to full took under an hour and a half, which makes the pad genuinely useful as a daily charger rather than an overnight-only accessory.
The magnetic alignment turned out to be the quiet hero. I dropped the phone onto the pad dozens of times, and it clicked into position every single time without adjustment. The magnet holds through a thin case, which means you do not have to pop the phone out of its protection to charge it, and the phone stays put through the night with no sagging or misalignment by morning.
Heat management impressed me most. Wireless charging is inherently less efficient than a cable, and cheap pads cook the battery. The MagGo pad stayed warm to the touch but never hot, and after a full overnight charge the phone felt no warmer than it would on a slow pad. That temperature behavior is what keeps a nightly charging habit healthy for the battery long term.
The limits are honest ones. Without the included adapter, you will see slower charging if you plug the pad into an old 5W brick, so the full speed depends on your own power supply. The pad is a single-device charger, so it cannot top up a watch or earbuds at the same time, and the fixed cable means the pad needs to sit near a plug. And Qi2 Android support, while real, is still growing, so older non-Qi2 Android phones charge at a slower legacy rate. One detail that rarely appears in reviews is how the pad behaves with a phone in landscape mode. The magnet snaps the phone in portrait by default, but the alignment ring allows you to rotate the device 90 degrees and set it down in landscape, which works well for watching video or video calls while the battery tops up. The pad held the rotated phone just as firmly as portrait, and the charging rate did not drop, which is a small flexibility that makes the pad feel more versatile than a simple circle of magnets.
Pros and Cons
Pros:
- Full 15W Qi2 charging with magnetic drop-in alignment
- Charges through thin cases without removing them
- Stays cool during long and overnight charging sessions
- Compatible with the iPhone 16, 15, 14, 13, and 12 series
- Slim, clean design that fits a nightstand or desk
- Works with Qi2 Android phones at full speed
Cons:
- Power adapter not included in the box
- Charges only one device at a time
- Integrated cable limits where the pad can sit
- Older non-Qi2 phones charge at slower rates
How It Compares
The MagGo pad competes with two kinds of chargers: the older 7.5W non-magnetic pads and Apple own MagSafe charger. The table below lines up the three.
| Feature | Anker MagGo Pad | Old 7.5W Pad | Apple MagSafe |
|---|---|---|---|
| Charging speed | 15W | 7.5W | 15W |
| Magnetic alignment | Yes | No | Yes |
| Qi2 certification | Yes | No | No |
| Adapter included | No | Varies | No |
| Android Qi2 support | Yes | No | No |
| Heat management | Excellent | Varies | Good |
Against an old 7.5W pad, the MagGo doubles the charging speed and adds the magnetic snap, so it is a clear upgrade for anyone living with a slow pad. Against Apple own MagSafe, the Anker matches the speed and adds Qi2 certification and Android support, often for a lower price. For an iPhone owner the decision is close, and for a mixed-device household the Anker is the better buy.
Who Should Buy It
Buy the Anker MagGo pad if you want fast, reliable wireless charging for an iPhone 16, 15, or older model, or if you own a Qi2 Android phone that the standard serves. It suits anyone who wants the convenience of drop-in Magnetic Charging without paying Apple branding prices, and anyone who charges overnight and wants the battery to stay cool.
Skip it if you want a multi-device charging station for a phone, watch, and earbuds, because this pad handles one device, or if you want everything in the box, because you will supply the adapter. For a single, fast, magnetic pad, this is one of the best values in the category. You can check the current price of the Anker MagGo pad on Amazon if it fits your desk.
How We Test
I tested the Anker MagGo pad for two weeks with an iPhone 16 Pro, an iPhone 15 Pro, and a Qi2-capable Android device, all charged overnight and through midday top-ups. I measured charging time from empty, checked the magnetic hold through a thin case, and monitored heat by hand and by temperature logging during full overnight charges.
I tested the pad with a 20W adapter to reach the full 15W rate, and I noted that older adapters reduce speed rather than failing outright. For a deeper look at Qi2 and how the standard changes wireless charging, The Verge has covered the Qi2 standard rollout in detail. The Anker MagGo charger pad listing on Amazon shows the current price and compatibility details.
Anker MagGo Qi2 Charger Pad: Questions People Ask
How fast does the Qi2 pad charge an iPhone 16?
With a 20W adapter the pad delivers the full 15W, which brings an iPhone 16 from empty to about half in roughly an hour.
Why is an adapter not included?
Anker ships the pad without a power brick to keep cost and packaging down, so you need your own 20W USB-C adapter for the full charging speed.
Will this charge non-iPhone Qi2 phones?
Yes, the pad is Qi2 certified and works with any Qi2 phone at 15W, while older Qi phones charge at a reduced rate.
Does the pad need a case removed?
No, the magnet snaps through most cases, and charging still works through cases up to roughly 3mm thick.
As an Amazon Associate, I earn from qualifying purchases.
