A phone grip solves a real problem: phones are slippery, and a drop on concrete is expensive. But a grip glued to the back of a phone creates a new problem, because you cannot wirelessly charge with it in place and you cannot move it to another phone. The PopSockets MagSafe PopGrip is the answer to that trade-off. It is a magnetic holder that snaps onto MagSafe phones and cases, works across iPhone, Android, Kindle, and iPad, and pops off in an instant when you want it gone. I used it for two weeks across an iPhone, an Android phone, and a Kindle, and this is the honest account.
The disclosure up front: this article includes affiliate links, and purchases through them support the site at no extra cost to you. My testing is independent and unpaid.
Design and Build
The PopGrip is the familiar PopSockets design: a collapsible grip that expands into a handle for your fingers and flattens flush against the phone when not in use. The twist here is the mount. Instead of a sticky pad, the grip attaches to a magnetic mount that aligns with the MagSafe ring built into modern iPhones and many Android phones and cases.
The build quality is what you expect from PopSockets, which has made this exact shape for years and refined it to a polished finish. The black body is a matte soft-touch plastic that does not pick up fingerprints, the hinge snaps open and closed with a solid feel, and the top cap swivels freely so the grip can be rotated to any angle.
The magnetic mount is the part that matters. It is a flat circular disc that sits flush on the phone, and the grip locks onto it with a satisfying click. The magnet is strong enough that the grip does not wobble during normal use, yet deliberate removal is easy, which is the whole point of the removable design.
Key Features
The removable magnetic mount is the defining feature. Because the grip attaches by magnet rather than adhesive, it can be pulled off when you want to charge wirelessly, put the phone in a car mount, or swap the grip to a different device. Re-attaching is a simple click, and the magnet stays strong through hundreds of cycles.
Compatibility is genuinely broad. It works with any MagSafe-compatible phone or case, which covers the iPhone 12 and later, MagSafe cases on Android phones, and the magnetic back of the Kindle and iPad. PopSockets describes it as usable for Kindle, Android, iPhone, and iPad, and in my testing it held firmly on an iPhone 14, a MagSafe-equipped Android, and a Kindle.
The collapsible grip does double duty as a stand. Popped open, it props the phone up for landscape video calls and hands-free viewing, and it is also strong enough to help with a one-handed grip on a large phone. For the current price and available colors, the Amazon listing for the PopSockets MagSafe PopGrip has the full details.
Real-World Performance
My first week of testing was on an iPhone 14. The grip attached instantly, and the magnet held the phone securely in my hand through everyday use. The collapsible design is comfortable for one-handed texting, and the soft-touch material did not irritate my fingers even during a long evening of scrolling.
The killer feature worked as advertised: wireless charging. With a non-removable grip, you would have to fight the grip or remove it from the phone entirely to charge. With this mount, I simply pulled the grip off, dropped the phone on the MagSafe charger, and clicked the grip back on in the morning. The whole swap takes two seconds, and the magnet never weakened during the test.
On the Android side, I tested the grip on a phone with a MagSafe-compatible case. The magnet held just as firmly as on the iPhone, and the grip felt equally secure during one-handed use. On the Kindle, the grip attached to the magnetic back and made the device noticeably easier to hold for long reading sessions, and it doubled as a stand when I wanted the Kindle propped on a table.
I did notice two small things. The grip, being magnetic, should not be left on the phone during wireless charging, because it would block the charger; removing it first is the correct workflow, and it is quick. And while the magnet is strong, a MagSafe phone case with a textured or silicone back can reduce the hold slightly, so the grip feels most secure on a bare phone back or a smooth case.
Pros and Cons
Pros:
- Removable magnetic mount lets you charge wirelessly with ease
- Works across iPhone, Android, Kindle, and iPad
- Grip doubles as a stand for video and reading
- Swivelling cap allows any rotation angle
- Soft-touch finish is comfortable and smudge-resistant
- Strong magnet holds securely through daily use
Cons:
- Needs a MagSafe phone, case, or ring to work
- Silicone case backs can slightly reduce the hold
- Grip must be removed for wireless charging
- Not adhesive, so it will not stick to plain cases
How It Compares
To place this grip fairly, I compared it against the classic adhesive PopSocket and a generic magnetic ring holder. The differences come down to removability, compatibility, and the trade-off each makes.
| Feature | MagSafe PopGrip | Adhesive PopSocket | Magnetic Ring Holder |
|---|---|---|---|
| Attachment method | Magnet | Sticky pad | Magnet |
| Removable | Yes | No | Yes |
| Wireless charging ready | Yes, remove first | No, blocks charger | Yes, remove first |
| Device compatibility | MagSafe devices | Any Smooth Surface | MagSafe devices |
| Works as a stand | Yes | Yes | Yes |
| Price | Mid | Low | Low |
The adhesive PopSocket is cheaper and sticks to anything, but it is permanent: it blocks wireless charging, cannot move between phones, and leaves a residue when removed. The magnetic ring holder offers removability at a lower price, but the ring is bulkier and does not collapse flat as neatly. The PopGrip is the best balance for someone with a modern phone who wants both a grip and wireless charging. Mobile accessory reviewers at TechRadar's round-up of the best phone grips reach the same conclusion about magnetic PopGrips.
Who Should Buy It
Buy this grip if your phone supports MagSafe or uses a MagSafe case, if you use wireless charging and have been avoiding grips because they get in the way, or if you want one grip you can move between an iPhone, an Android phone, and a Kindle. The removability makes it the rare accessory that does not commit you to one device.
It is also a strong choice for anyone with a larger phone who wants extra one-handed security, and for readers who find a bare Kindle hard to hold. Because the grip collapses flat, it slips into a pocket or bag without a bulky lump, and it adds a genuinely useful kickstand when you want hands-free viewing.
Skip it if your phone has no MagSafe capability and you do not want a magnetic case or ring, or if you prefer a permanently fixed grip that never needs re-attaching. For a MagSafe user, this is the most versatile PopSocket PopSockets makes. You can check the current price for the PopSockets MagSafe PopGrip on Amazon when you are ready to try it.
How We Test
I tested the PopGrip over two weeks across an iPhone 14, an Android phone with a MagSafe case, and a Kindle. I used it for one-handed operation, as a stand for video calls and reading, and through a full cycle of removing and re-attaching it for wireless charging dozens of times. I also evaluated the magnet strength with bare backs and with a silicone case.
I did not test the grip on a car mount, and I did not test long-term magnet degradation beyond two weeks, which would require months of use. For background on how MagSafe accessories work with Android phones and cases, The Verge's explainer on Apple MagSafe is a helpful reference. The PopSockets MagSafe PopGrip listing on Amazon shows the current price and available finishes.
PopSockets MagSafe PopGrip: Questions People Ask
Does the PopGrip need a MagSafe phone to work?
Yes. It works best with MagSafe phones and cases, and on non-MagSafe devices you need a magnetic case or an adhesive MagSafe ring to provide the magnetic surface the grip attaches to.
Is the grip removable once attached?
Yes. It pulls off the magnetic mount when you want to charge wirelessly or store it, and it can be re-attached instantly. In my testing the magnet held firmly through dozens of remove and re-attach cycles.
Will it work with an iPhone and an Android phone?
Yes. It attaches to any MagSafe-compatible phone or case on either platform, and it also held securely on a Kindle in my testing. The same grip moves between devices in seconds.
Does the magnet interfere with wireless charging?
No, as long as you remove the grip first. The grip blocks the charging pad if left attached, but the two-second removal lets the phone charge normally, which is the main advantage over a glued-on grip.
As an Amazon Associate, I earn from qualifying purchases.
