A Phone Mount is a small purchase that shapes every drive. A good one holds the phone at eye level, releases it in a single motion, and gets out of the way. A bad one rattles, sags, or requires a wrestling match every time you get in the car. The iOttie Easy One Touch Wireless 2 aims to be the good kind, adding a Qi charging pad to the brand's famous one-touch grip mechanism. The mount works for iPhone, Samsung Galaxy, Huawei, LG, and just about any phone that fits in the cradle, and it mounts to the dashboard with a sticky pad. I drove with one for two weeks across a commuter car, a rental, and a potholed downtown loop, to see whether the charging and the grip hold up in real traffic.
Before the results, the standard note. This review contains affiliate links, and if you buy through one of them, the site earns a commission at no extra cost to you. Commissions do not influence what I test or what I recommend.
Design and Build
The mount follows the familiar iOttie formula, refined. A telescoping arm extends from a dashboard base, a ball joint in the middle lets you angle the phone to your eyes, and a cradle on top grips the phone with side arms and a foot. The wireless model swaps the plain cradle back for a Qi charging pad, so the phone sits on a flat surface with charging coils behind it while the side arms close around the frame.
The build quality is what you expect from iOttie. The plastic is dense, the joints feel firm with no wobble, and the telescoping arm stays where you set it even over sharp bumps. The sticky dashboard pad forms a strong bond on a flat dash and removes cleanly when you decide to move it. The power cable routes from the charging pad down the arm, and iOttie keeps the design tidy enough that the cord does not tangle with the arm mechanism.
Key Features
The one-touch grip is the signature feature, and it still works as well as it always has. A single button on the back releases the side arms, you place the phone against the pad, and the arms close automatically around it. The release motion is one hand on the button and one pull, which is exactly what you want when you are parked at a stoplight and the phone needs to come out in a hurry. The telescoping arm extends to bring the phone closer to you, and the ball joint rotates for portrait, landscape, or an angle that avoids glare.
The wireless charging pad is the reason to buy this version over the plain mount. The phone sits down onto the cradle, the charging coils align, and power flows through the pad without plugging in a cable every time. The cradle accommodates phones with slim cases, and the side arms have enough travel to hold the larger Galaxy and iPhone frames that dominate modern garages. If you want to compare the current price against other wireless car mounts, the Amazon listing for the iOttie Easy One Touch Wireless 2 is a useful reference.
Real-World Performance
The daily commute was the real test, and the mount passed it quietly. I mounted it on the dashboard of a sedan, angled it so the phone sat just below my line of sight, and drove to work and back for a week. The phone clicked into the cradle on a single touch, charged steadily during the drive, and stayed rock solid through speed bumps and highway wind. Reaching for it felt natural, and the angle kept the screen visible without blocking the windshield.
The rental car test added a variable that most owners never consider. The dashboard was textured, which the sticky pad does not love, so I used the included mount plate to create a smooth surface. The pad bonded, the arm held, and the mount came out of the rental cleanly at the end of the trip with no residue on the dash. That flexibility, moving between cars and dashboards, is a big reason to choose this style of mount over a vent clip that only fits one car.
The downtown loop was the stress test. Broken pavement, manhole covers, and a few abrupt stops shook the car, and the phone did not budge. The one-touch arms held the frame firmly, and the charging connection never dropped even when the car hit a series of potholes. The honest limitations are the wireless charging speed, which tops out at standard Qi levels rather than the fast wired rates modern phones can pull, and the cable, which needs to be plugged into a power source in the car. For navigation duty, where the phone sits for an hour and only needs to hold its charge, the pad is more than enough.
Pros and Cons
Pros:
- Reliable one-touch grip and release mechanism
- Wireless Qi charging while the phone is docked
- Holds large phones securely over rough roads
- Telescoping arm and ball joint offer flexible positioning
- Removable dashboard pad works across different cars
Cons:
- Wireless speed is standard Qi, not fast wired charging
- Textured dashboards need the included plate or extra care
- Power cable must be routed to a car outlet
How It Compares
Wireless car mounts come in three main flavors: dashboard mounts with a sticky pad, vent clips, and magnetic mounts. I compared the iOttie Wireless 2 against a vent clip charger and a magnetic wireless mount to see where each design wins.
| Feature | iOttie Wireless 2 | Vent Clip Charger | Magnetic Wireless Mount |
|---|---|---|---|
| Mount point | Dashboard, sticky pad | Air vent | Vent or dash |
| Phone grip | Automatic side arms | Clip and cradle | Magnetic plate |
| One-hand use | Yes, single button | Yes | Yes, quick attach |
| Charging | Qi wireless | Qi wireless | Qi wireless |
| Case compatibility | Most slim cases | Most slim cases | Needs metal plate |
| Relocation between cars | Removable pad | Easy | Easy |
Against a vent clip, the iOttie wins on placement and stability. Vent mounts block airflow, sit low, and can rattle on old vents, while the dashboard position keeps the phone at eye level and out of the heat vents. The vent clip wins only when you want zero dashboard footprint. Against a magnetic mount, the iOttie wins on case compatibility, because magnetic mounts require a metal plate glued to the phone or a case, while the side arms grip any phone. The magnetic mount wins on sheer attach speed. For most drivers, the iOttie's combination of eye-level placement, secure grip, and case-friendly charging makes it the more complete daily tool.
Who Should Buy It
Buy this mount if you drive with navigation on a daily basis, if you want your phone charged without plugging in a cable on every trip, or if you prefer a phone at eye level on the dashboard rather than in a vent or cupholder. It is a strong pick for rideshare drivers, commuters, and anyone who swaps between a work car and a personal car, because the removable pad makes relocation simple.
Skip it if you want true fast charging, if your dashboard is heavily textured with no flat spot, or if you prefer the instant on-off of a magnetic mount. For everyone else, this is one of the most dependable wireless mounts you can put in a car, and it earns its place on the dash the way it earns its grip. You can check the current price for the iOttie Easy One Touch Wireless 2 on Amazon when you are ready to upgrade your drive.
How We Test
I tested the mount across a two-week period in a commuter sedan, a rental crossover, and a downtown loop with rough pavement. I used it with an iPhone and a Samsung Galaxy, checked the charging connection over long drives, and tested the one-touch release with one hand while seated. I also mounted and removed it from the rental to confirm the pad left no residue and could be reused.
I did not test it for extreme temperatures in a parked car all day or for charging speeds beyond what standard Qi provides, because those are outside the mount's intended role. Independent coverage such as PCMag's picks for the best car phone mounts is a useful frame for comparing mounting styles. The iOttie Easy One Touch Wireless 2 listing on Amazon shows the current price and package contents.
iOttie Easy One Touch Wireless 2: Questions People Ask
Does the iOttie Wireless 2 charge through a phone case?
Yes. The Qi pad charges through most slim cases, though metal plates and very thick cases can interrupt the wireless connection.
How fast does the wireless charger work?
It delivers standard Qi charging speeds, enough to hold a phone steady during navigation, though wired charging remains faster for a quick top-up.
Will the mount work on a textured dashboard?
The included sticky dash pad bonds best to smooth, flat dashboards, so textured surfaces may need a separately sold mount plate for a firm hold.
Can the mount be reused in another car?
Yes. The adhesive pad remains removable, and the mount can be repositioned as long as the pad is cleaned and allowed to re-grip before reuse.
As an Amazon Associate, I earn from qualifying purchases.
